Website
15
6.8 AUX
Channel name pre-selection:
1. Click [CH5] or other channels to enter the interface to set the channel name.
2. Click the icon and click the right side of the corresponding channel as needed.
Click to return to the previous level interface.
• The channel will be occupied after selection.
To set the channel name:
3. Click the [Name] option to set the desired channel name. Press [Enter] for
confirmation. Click to return to the previous level interface.
A name can be set to any combination of letters, numbers or symbols.
Noble Pro has two fixed channels. Channel 1 outputs steering and channel 2 outputs
throttle. If you need to increase the fixed channel, you can use this function.
Auxiliary channels can be pre-selected with the names and states of channel 3 to
channel 18. The channel pre-selected function and the corresponding state can be
viewed on the main interface. See the following table.
Note on auxiliary channel menu and displayed states:
[S DIR/2 DIR]: when single direction is selected, channel function can be enabled or disabled through the key or
knob. When two-way is selected, the channel value can be adjusted.
[Single key/Combination key]: the channel function can be enabled or disabled by using one switch. Two switches
can be used to adjust the channel value.
[Type]: Used for 2-position/3-position switch adjustment.
[Function] or [Function 2]: assign the channel to this key or knob.
[Direction]: used for forward or reverse direction of this key or knob.
[Mode]: used for the trigger or flip of the key.
[Step]: used for adjusting the change amount of the value for a single operation. The value change level is 1. The
level range is 1-120. The value can be adjusted as required.
Channel Name
Channel Status
Chinese
English
Chinese
English
方向
Steering
Diaplays the progress bar of the
corresponding channel
油门
Throttle
前桥差速
F Diff
开启 / 锁定
Open/Lock
中央差速
C Diff
开启 / 锁定
Open/Lock
后桥差速
R Diff
开启 / 锁定
Open/Lock
换挡
Shift
高 / 中 / 底
High/Mid/Low
高低速
Gearbox
高速 / 中速 / 低速
High/Mid/Low
分动箱
T Case
前驱 / 四驱 / 后驱
FWD/4WD/RWD
断传
Dig
断开 / 四驱
Off/4WD
灯光
Lights
开 / 关
On/Off
远光灯
H Beam
开 / 关
On/Off
近光灯
L Beam
开 / 关
On/Off
雾灯
F Light
开 / 关
On/Off
顶灯
T Light
开 / 关
On/Off
拉烟
Smoke
开 / 关
On/Off
鸣笛
Whistle
开 / 关
On/Off
绞盘
Winch
收 / 停 / 放
Go/Stop/Back
底盘升降
Ecas
升 / 降
Up/Down
引擎
Engine
启动 / 熄火
On/Off
