Pro
Website
30
6.24 Help
6.23 Beginner Mode
The beginner mode is suitable for entry level players to improve the safety of operations by
limiting the amount of throttle servo.
This function is hidden by default. You need to enable it manually.
Setup:
1.Go to the [Custom Main Menu] menu under the [MODEL] menu bar, and select the
[Beginner] check box. After selection, this function is displayed on the menu interface.
2.Find the function in the menu and click
icon to enable this function. When this
function is enabled, the icon will change to
。
Click the icon to enter the channel display interface. In this list, you can view the data
progress bar of all channels and the percentage data of channels.
6.22 Display
This function displays the model's channel output and can be used to test
output and servo range.
Press the icon
to start servo test mode, which will move all the channels slowly though
their entire range of motion. Press the icon to turn off servo test mode.
WARNING • Make sure the model engine is powered off while the test function is
activated.
6.21 Boat
This function is used only when you are using a model boat. When this function is active,
the throttle channel is set to its lowest position and the brake functionality is disabled.
To enable this function, select [No Brake Mode] to switch to boat mode. When switching
is successful, [Normal Mode] is changed to [No Brake Mode]. The check box is selected.
This function provides the QR code of the product manual and the QR code of Skyfly
promotion platform, including the official website, WeChat public account, and advertising
site at www.flysky-cn.com. Users can obtain the QR code and scan it as required.
4. Under this function, you can also set the percentages of [Steering Gain], [Throttle Gain], and [Priority]. The
adjustable percentages range is 0% to 100%. After selecting the option, click the "+" or "-" icon to change the
percentage.
5.
Click [Gyroscope calibration]. A pop-up box will appear, indicating"Are you sure you want to start the calibration".
The system prompts successful calibration with sound reminder.
•
When calibrating the gyroscope, please make sure the model is in a stable and stationary state.
6.
Tap [Advanced], then select a type for the model car. After clicking [Custom], tap an item you want to set among [ST
Wheel Gain], [Damper Point], [Damper] and [Filter]. Afterwards,
click the "+" or "-" to set to the desired value.
