Website
23
[Mixing ratio]: sets the amount of mixing from the steering channel mixing to the mixed
channel. The adjustment range is 0-100%.
Setup:
1. Click [Ch3] on the right side of [Mixing Channel]. Click the right side on the
corresponding channel. After selection, the channel will be occupied. Click to return
to the previous level interface.
• Each channel can only be assigned one mixing function. It is not allowed to
conflict with other Func Assign channel. When the selected channel is assigned
with other mixing functions, the system will give a pop-up window reminder.
6.12 MIXES
This function allows you to set 5 mixing functions, that is, [4WS Mixing], [Track Mixing], [Drive Mixing], [Brake
Mixing], and [Programming Mixes].
4WS Mixing
Used to set the wheels that control steering of the vehicle, front, rear or all four wheels.
This function is applicable to crawler with steering on both front and rear wheels.
By default, the front wheel steering is used in this function.
Track Mix
This function is applicable to models such as tracked vehicles and tanks, and allows
one trigger or steering wheel to control the left and right tracks to move forward or
steer differently at the same time.
This function allows you to set the ratio of forward, backward, left and right
separately. The ratio adjustment range is 0-100% and the adjustment step is 1%.
The left progress bar shows the channel value of CH1 left track. The right progress bar
shows the channel value of CH2 right track. The figure on the left indicates the state
of operating the throttle forward separately.
Setup:
1. Select the check box on the right side of [Track Mixing] to enable this function. After
the function is enabled, the icon will be changed to .
2. Click the ratio you want to set. The selected option is highlighted.
3. Click "+" or "-" icon to change the ratio as required. Press the "+" or "-" icon to
accelerate ratio adjustment.
The ratio can be adjusted by selecting [Track Mixing Forward], [Track Mixing
Backward], [Track Mixing Left] or [Track Mixing Right] in the [Key Setting] function,
with assigning VR and TR keys or knobs for adjustment. A pop-up window will appear
in the adjustment by pressing the key, prompting the real-time value.
2. Click the "+" or "-" icon to change the ratio as required. Press the "+" or "-" icon to accelerate the ratio
adjustment.
You can select [4WS Mixing ratio] under [Key setting] function. Assign VR or TR key or knob for adjustment. A
pop-up window will appear in the adjustment by pressing the key, prompting real-time value.
3. Select the steering type as required.
You can select [4WS steering mode switch] under [Key Setting] function, to assign SW key for switching and
selection. A pop-up window will appear in the switching, prompting the current steering type. You can select
[4WS steering back], [4WS steering front and back in the same direction] or [4WS steering front and back in
reverse]. The function can be quickly enabled or disabled through the SW key.
4.
Click the
icon to enable this function. After this function is enabled, the icon will change to
.
5.
Verify the settings are normal as expected.