Website
11
This function changes the steering channel's response curve. There are 2 main
parameters:
[Rate]: Changes the outer limits of the steering, the default and maximum is 100%.
[Exp]: Changes the steering curve, which changes the response of the steering wheel.
The Exp. setting can be positive or negative.
Setup:
1. Eenter this menu then touch the
icon to enable this function. When this function is
enabled, the icon will change to
.
2. Touch [rate] or [EXP](When an option is selected it will be highlighted).
3. Use the + and - icons to raise or lower the percentage as needed.
4. Repeat for the other setting as needed.
5. Test to make sure everything is working as expected.
6.4 ST DR/EXP
6.5 TH DR/EXP
This function changes the throttle channel's response curve. There are 2 main
parameters:
[Rate F] and [Rate.B]: Reducing the rate shrinks the outer limits of the curve. As the rate
drops below 100%, the graph will update in real-time. The maximum is 100%.
[Exp.F] and [Exp.B]: Changes the steering curve, which changes the response of the
throttle. The Exp. setting can be positive or negative.
Changes to the rate and exponential can be seen on the graph located in the center of
the screen. The system also gives a real-time readout of the channel's current position.
Setup:
1. Touch [rate.F], [rate.B], or [
Exp.F],[Exp.B]
.
2. Use the + and - icons to raise or lower the percentage as needed.
3. Repeat for the other setting as needed.
4. Test to make sure everything is working as expected.
