Flyer Mountain, Оригинальное руководство пользователя

Страница: 286 / 412

35
EN
Charging status indicator
The main menu “Drive” on your display contains
a symbol that indicates the battery charge level,
which is also shown as a percentage .
In all other menus, the charge level is displayed
as a symbol in the top-left .
If the charge level is less than 20%, the battery
is red .
Battery charge level check
Akkuladestandsanzeige
Jede leuchtende Akkuladestandsleuchte steht für ca . 20 % der Akkukapazität .
Akkuladestandsleuchten
5 an 4 an 3 an 2 an 1 an 1 blinkt*
1
5 an 4 an 3 an 2 an 1 an 1 blinkt*
1
Anteil der Akkukapazität
im Vergleich zum voll
geladenen Akku
81 % bis 100 % 61% bis 80% 41% bis 60% 21% bis 40% 11% bis 20% 1% bis 10%
*
1
Wenn keine Restkapazität mehr im Akku vorhanden ist, blinkt eine Akkuladestandsleuchte schnell .
Akkuladestandsanzeige
Jede leuchtende Akkuladestandsleuchte steht für ca . 20 % der Akkukapazität .
Akkuladestandsleuchten
5 an 4 an 3 an 2 an 1 an 1 blinkt*
1
5 an 4 an 3 an 2 an 1 an 1 blinkt*
1
Anteil der Akkukapazität
im Vergleich zum voll
geladenen Akku
81 % bis 100 % 61% bis 80% 41% bis 60% 21% bis 40% 11% bis 20% 1% bis 10%
*
1
Wenn keine Restkapazität mehr im Akku vorhanden ist, blinkt eine Akkuladestandsleuchte schnell .
1 LED battery charge indicator
Shows the e-bike battery’s remaining capacity .
If an error occurs, an error code is displayed (see
Chapter 5 .29 Battery error codes)
2 Control button for battery charge level
Let the LED battery charge level indicator blink to
verify the remaining battery capacity .
3 Charger connector
4 Rubber cap
Protects the charger connectors when the battery
is not being charged .
To check if the battery is charging, press the control
button on the battery to be shown the charge level .
Charge the battery when not all of the five charge
indicator LEDs light up . Only use the original
charger .
Never use chargers supplied by other manufac-
turers!
A fast-flashing LED indicates that the battery has
been completely discharged .
Removing the battery
1 . Switch off the electrical system first. To do this,
press the on/off button on the display.
2 . Unlock the battery with the battery key and re-
move it from the holder. Hold the battery firmly,
as it is heavy .
Charging the battery
The battery can be charged while it is installed in
the e-bike or once it has been removed .
Safety warning for the battery charger
The name plate on the charger refers to warning
notes and other safety information in connection
with handling the charger . Be sure to read this be-
fore use . Please note the temperature ranges of
the battery and charger:
Battery operating temperature: -5 °C to 40 °C
Battery storage temperature: 10 °C to 40 °C
Charging temperature range: 0 °C to 40 °C
Only use the charger supplied with your
e-bike . Only this charger is designed for
the lithium-ion battery used on your
e-bike .
Completely charge the battery using the
charger before the first ride to ensure full
battery performance . Read and adhere
to the operating instructions for the
charger when charging the battery . Do
not connect the charger to the mains
socket immediately after a sudden tem-
perature change from cold to warm . It is
possible that condensed water has col-