Fluke 5080A/SC, Руководство пользователя

Страница: 27 / 36

Scope Calibration Option
Summary of Commands and Queries
19
Table 2. Overlapped and Coupled Commands
Command Overlapped Coupled
SCOPE(?) Yes Yes
TRIG(?) Yes No
OUT_IMP(?) Yes Yes
SCOPE(?) <value >
Description Programs the 5080A to use the Megohm Option, if installed.
Parameters <value> = OFF Turns the Scopt option off. Programs 0 V, 0 Hz
output at the NORMAL terminals.
VOLT Oscilloscope ac and dc voltage mode. Programs
20 mV p-p, 1 kHz, output at the SCOPE BNC,
output impedance 1 M
Ω
standby if from OFF or
previously in standby.
EDGE Oscilloscope edge mode. Programs 25 mV p-p,
1 MHz, output at the SCOPE BNC, standby if
from OFF or previously in standby.
LEVSINE Oscilloscope-leveled sine mode. Programs
30 mV p-p, 50 kHz, output at the SCOPE BNC,
standby if from OFF or previously in standby.
MARKER Oscilloscope Marker mode. Programs the period
to 1 ms, output at the SCOPE BNC, standby if
from OFF or previously in standby.
Example
SCOPE VOLT; OUT -2 V, 0 Hz
(dc voltage, -2 V)
SCOPE VOLT; OUT 4 V, 1 kHz
(ac voltage, 4 V p-p, 1 kHz)
SCOPE EDGE; OUT 0.5 V, 5 kHz
(Edge, 0.5 V p-p, 5 kHz)
SCOPE LEVSINE; OUT 1 V, 200 kHz
(Leveled sinewave, 1 V p-p,
200 kHz)
SCOPE MARKER; OUT 2 MS
(Marker period of 2 ms)
Query
SCOPE?
Returns the current mode of operation (OFF,
VOLT, EDGE, LEVSINE, or MARKER).
TRIG(?) <value >
Description Programs the scope options trigger out BNC.
Parameters <value> = OFF Turns the trigger output off.
DIV1 Turns the trigger output on. Frequency is the
same as the signal at SCOPE output.
DIV10 Turns the trigger output on. Frequency is 1/10
the signal at SCOPE output.
DIV100 Turns the trigger output on. Frequency is 1/100
the signal at SCOPE output.
Example
TRIG OFF
Turns the trigger output off.
Query
TRIG?
Returns the mode of the Megohm option (OFF,
DIV1, DIV10, or DIV100).
riešenia na presné meranie
http://www.elso.sk