20
Floataway Installation Manual 230v 50Hz Tranquility 2017 - v3
The Air hoses
The switches in the pool area are
connected by 4mm air hoses, these need
to be connected to the air switches on
the side of the control box.
You simply need to push the black tip
over the small nipple as shown.
Enough tubing has been provided, you
should not need to cut it.
Application
Air Button Colour
Air Line Colour
Light Button
White
Yellow
Call Attendant Button
Red
Red
Music Mute
Black
Clear/White
Inner Door
Black
Blue
Outer Door
Black
Green
The Music/Speaker
The sound is transmitted into the water with a sound transducer that excites the surface of the
technical pack. The wire has been provided to connect to this, it uses an XLR connector with a
GREEN colour code. It is a mono system (one sound source) as stereo does not work underwater
due to the speed of sound in water is different to air. The control box has an amplifier built into it,
the sound source is at the remote through a 3.5mm standard headphone socket.
Music Mute is built into the amplifier, there is an additional air button if fitted.
The cable is fitted
to the side of the
tranquility in the
factory
The sound
transducer is fitted
to the side wall of
the tank near the
head area.
