manualshive.com logo in svg

Flexim FLUXUS G704, Руководство пользователя, Страница: 98 / 257

Поделиться
Скачать
Flexim FLUXUS G704 Скачать руководство пользователя страница 98

98

UMG70XV3-4EN 12.01.2009

 10 Basic Measurement

Repeat the steps for all channels on which will be measured.

10.7.5 Value of the Sound Speed

The sound velocity of the medium can be displayed during measurement by pressing key

.

If an approximate range for the sound speed has been entered in the program branch

PARAMETER

 and the transducer distance has been optimized afterwards as described in

section 10.7.4, it is recommended to note the sound velocity for the next measurement.
The optimization procedure does not need to be repeated then.
Also note the medium temperature as the sound speed depends on the temperature. The
value can be entered in the program branch 

PARAMETER

 or a user defined medium can

be defined for this sound velocity (see section 14.2 and 14.3).

10.8  Start of Measurement

If the standard volume flow is selected as physical quantity during the gas measurement,
the operating volume flow can be displayed, too.

If more than one measuring channel is available/activated, the flowmeter works with an
integrated measuring point multiplexer providing quasi simultaneous measurement on
the different measuring channels. 
The flow is measured on one measuring channel for approx. 1 s, then the multiplexer
switches to the next activated channel. 

Enter the new adjusted transducer distance. Press EN-
TER.

Scroll with key 

 again until the transducer distance is

displayed and check the difference between optimum and
entered transducer distance. Repeat the steps if neces-
sary.

Note!

Never change the transducer distance during measurement without
having restarted the consistency check.

The measured values will be displayed in the lower line.
Press ENTER to return to the fine adjustment of the trans-
ducer distance (see section 10.7.3).

Press key 

 to display the standard volume flow.

The character * indicates that the displayed value (here:
operational volume flow) is not the selected physical quan-
tity (here: standard volume flow).

Transd.Distance?

50.0

mm

L=(51.1) 50.0 mm

54.5

m3/h

DISP

DISP

A:Volume(oper.)

31.82

m3/h

A:Volume(norm.)

31.82

m3/h

DISP

A:Volume(oper.)

*

16.22

m3/h

Содержание FLUXUS G704


































































































































































































































































Отзывы:

Нет отзывов