manualshive.com logo in svg

Flexim FLUXUS G704, Руководство пользователя, Страница: 9 / 257

Поделиться
Скачать
Flexim FLUXUS G704 Скачать руководство пользователя страница 9

UMG70XV3-4EN 12.01.2009

9

1 Introduction

1

 Introduction

1.1

 Regarding this Manual

This manual has been written for the personnel operating the ultrasonic flowmeter FLUX-
US. It contains important information about the instrument, how to handle it correctly,
how to avoid damages. Always keep this manual at hand.
Get acquainted with the safety rules and the handling precautions. Make sure you have
read and understood this manual before using the instrument.
All reasonable effort has been made to ensure the correctness of the content of this man-
ual. If you however find some erroneous information, please inform us. We will be grate-
ful for any suggestions and comments regarding the concept and your experience work-
ing with the instrument.
This will ensure that we can further develop our products for the benefit of our customers
and in the interest of technological progress. If you have any suggestions about improv-
ing the documentation and particularly this User Manual, please let us know so that we
can consider your comments for future reprints.
The content of this manual is subject to changes without prior notice. All rights reserved.
No part of this manual may be reproduced in any form without FLEXIM's written permis-
sion.

1.2

 Safety Precautions

You will find in this manual the following safety information:

Observe these safety precautions!

Note!

The notes contain important information which help you use the flow-
meter optimally.

Attention!

This text contains important instructions which should be observed to
avoid damage or destruction of the flowmeter. Proceed with atten-
tion!

This texts denotes instructions according to directive 94/9/EC.

Содержание FLUXUS G704


































































































































































































































































Отзывы:

Нет отзывов