manualshive.com logo in svg

Flexim FLUXUS G704, Руководство пользователя, Страница: 135 / 257

Поделиться
Скачать
Flexim FLUXUS G704 Скачать руководство пользователя страница 135

UMG70XV3-4EN 12.01.2009

135

14 Libraries

Medium Properties

Enter for the medium:
• longitudinal sound velocity (in m/s)
• kinematic viscosity (in mm

2

/s)

• density (in kg/m

3

)

• gas compressibility factor.
One to five values depending on the selected function have to be entered. Press ENTER
after each input.
If an already defined medium is edited, for each property of some of the functions will be
requested whether to edit it. Select 

YES

 or 

NO

. Press ENTER. Change the values if nec-

essary.

14.3.4 Input of Heat Flow Coefficients

Select 

SPECIAL FUNCTION\INSTALL MEDIUM

. Press ENTER.

Select 

YES

 to store the entered properties or 

NO

 to quit the

menu item without storing. Press ENTER.

Note!

The heat flow coefficients can also be edited with the programs Flux-
Data and FluxKoef.

Note!

The entered coefficients will not be checked. Absurd values can re-
sult in wrong measured values or in permanent system errors.

Select the list item  

HEAT-FLOW

 

COEFFS

. Press ENTER.

An error message will be displayed if the coefficient mem-
ory does not contain space for heat flow coefficients.
Partition the coefficient memory (see section 14.1).
Select the medium for which the heat flow coefficients
have to be entered.
User defined media will be displayed first, followed by the
media of the internal database.
Select an index for storing the heat flow coefficients of the
selected medium. Press ENTER.
If the coefficient memory is partitioned so that heat flow co-
efficients for two media can be entered, indices 01 and 02
are available.

Save changes

no

>YES<

Edit Medium

Heat-flow-coeffs

Heat-flow coeffs

NOT FORMATTED !

Heat-Coeffs for 

BEER

Select index

02(--not used--)

Содержание FLUXUS G704


































































































































































































































































Отзывы:

Нет отзывов