manualshive.com logo in svg

Flexim FLUXUS G704, Руководство пользователя, Страница: 111 / 257

Поделиться
Скачать
Flexim FLUXUS G704 Скачать руководство пользователя страница 111

UMG70XV3-4EN 12.01.2009

111

12 Advanced Measuring Functions

12.6  Measurement of Transient Processes (FastFood mode)

The FastFood mode allows to measure flows with high dynamics. The continuous adap-
tation to changing measuring conditions which takes place in the normal measuring
mode is only partially realized in FastFood mode.
The sound velocity of the medium is not measured. The sound velocity stored in the in-
ternal database will be used instead, taking into account the medium temperature en-
tered in the program branch 

PARAMETER

 (or the measured temperature if the medium

temperature is measured).
A change of measuring channel is not possible. The inputs and outputs can still be used.
The measured values are stored as usual. The FastFood mode has to be enabled and
activated.

12.6.1 Enabling/Disabling the FastFood Mode

12.6.2 Storage Rate of the FastFood Mode

12.6.3 Activating/Deactivating the FastFood Mode

If the FastFood mode is enabled and a measurement started, the normal measuring
mode is still running (i.e. multi-channel measurement with permanent adaptation to the
measuring conditions). If the data memory is activated, the measured values will not be
stored.

If the data memory is activated, a new data set will be defined and storing of measured
values will be started. If the FastFood mode is deactivated or if the measurement is inter-
rupted, storing will be stopped.

Press key C. Enter HotCode 007022. The menu item 

EN-

ABLE FASTFOOD

 will be displayed.

Select 

YES

 to enable the FastFood Mode, 

NO

 to disable it.

When the FastFood mode is enabled, a 

STORAGE RATE

 in

ms has to be entered in the program branch 

OUTPUT OP-

TIONS

.

Press ENTER.

Press key 

 to activate/deactivate the FastFood mode

for the measuring channel currently displayed. 

Scroll with key 

 in the upper line until the activated mea-

suring mode 

A:MODE=FASTFOOD

 or 

A:MODE=TRANSTIME

will be displayed. 

Enable FastFood

no

>YES<

Storage Rate

70

ms

A:Volume(oper.)

54.5

m3/h

A:Mode=FastFood

54.5

m3/h

DISP

Содержание FLUXUS G704


































































































































































































































































Отзывы:

Нет отзывов