Flexim FLUXUS G704, Руководство пользователя, Страница: 214 / 257

214 UMG70XV3-4EN 12.01.2009
B Menu Structure
input of the lowest/highest measured value to
be expected for the current output
These values will be assigned to the lower/
upper limit of the output range.
These displays are indicated only if
CURRENT
LOOP
has been activated.
input of the error value delay, i.e. of the time
interval after which the value entered for the
error output will be transmitted to the output if
no valid measured values are available
This display is indicated only if
ERROR-VAL.
DELAY
is activated in
SPECIAL FUNC-
TION\SYSTEM SETTINGS\DIALOGS/
MENUS
(=
EDIT
)
Pulse Output
activation of a pulse output
This display is indicated only if a pulse output
has been installed in
SPECIAL FUNC-
TION\SYSTEM SETTINGS\PROC. OUT-
PUTS
input of the pulse value (totalizer value at
which a pulse will be emitted)
This display is indicated only if
PULSE OUT-
PUT
has been activated.
input of the pulse width
range: 1 or 80...1000 ms
This display is indicated only if
PULSE OUT-
PUT
has been activated.
s
cold start
resistant
Zero-Scale Val.
0.00 m3/ h
Full-Scale Val.
300.00 m3/ h
Error-val. delay
10 s
Pulse Output
B1: no >YES<
Pulse Value
0.01 m3
Pulse Width
100 ms