manualshive.com logo in svg

Flexim FLUXUS G704, Руководство пользователя, Страница: 152 / 257

Поделиться
Скачать
Flexim FLUXUS G704 Скачать руководство пользователя страница 152

152

UMG70XV3-4EN 12.01.2009

18 Outputs

18

 Outputs

If the flowmeter is equipped with outputs, they have to be installed and activated before
they can be used:
• assigning a measuring channel (source channel) to the output (if the flowmeter has

more than one measuring channel)

• assigning the physical quantity (source item) to be transmitted to the output by the

source channel, and the properties of the signal

• defining the behavior of the output in case no valid measured value is available
• activation of the installed output in the program branch 

OUTPUT OPTIONS

18.1  Installation of an Output

The outputs will be installed in the program branch 

SPECIAL FUNCTION\SYSTEM SET-

TINGS\PROC.

 

OUTPUTS

.

Note!

The configuration of an output will be stored at the end of the dialog.
If the dialog is quit by pressing key BRK, the changes will not be
stored.

Select 

SPECIAL FUNCTION\SYSTEM SETTINGS\PROC.

OUTPUTS

. Press ENTER.

Select the output to be installed. The scroll list contains all
actually available outputs.
A tick 

 after a list item indicates that this output has al-

ready been installed. Press ENTER.
This display is indicated if the output has not been installed
yet. Select 

YES

. Press ENTER.

If the output is already installed, select 

NO

 to reconfigure it

or 

YES

 to uninstall the output and to return to the prece-

dent menu item to select another output. Press ENTER.

Select in the scroll list the measuring channel to be as-
signed as source channel to the output. Press ENTER.
This display will not be indicated, if the flowmeter has only
one measuring channel or only one measuring channel is
active.
Select the physical quantity (source item) to be transmitted
to the output by the source channel.
If a binary output is configured, only the list items 

LIMIT

and 

IMPULS

 will be displayed. 

SYSTEM settings

Proc. outputs

Install Output

Current I1

I1 enable

no

>YES<

I1 disable

>NO<

yes

I1 Source chan.

Channel A

I1 Source item

Measured value

Содержание FLUXUS G704


































































































































































































































































Отзывы:

Нет отзывов