Flavor Burst TS 44BEV, Руководство пользователя

Страница: 60 / 100

59
Connecting the Unit Syrup Lines
Each syrup line Lead attached at the lower
back of the cabinet connects 4 bags of syrup to
each Blending Assembly, with another tube
connecting the Sanitizer Tank to each Blending
Assembly. A 9-Tube Extension is included to
connect the Lead that is the furthest from the
corresponding Blending Assembly.
1. Locate the 9-
Tube Leads labeled ‘A’ and ‘B’
at the back of the cabinet.
Lead ‘A’ will
connect to the freezer or barrel on the left;
Lead
‘B’ connects to the freezer or barrel on
the right. If needed, the 9-Tube Extension
provided can be attached to one of the
leads (typically ‘B’) if one of the freezers is
further away from the cabinet. If you do not
need an extension (ie, both 9-Tube
Assemblies reach to the back of the
cabinet), then skip to Step 10.
2. Remove the dust cap of the Lead that will
require the Exte
nsion, typically Lead ‘B’ for
the freezer on the right. Slide the coupler
casing toward the unit to expose the Lead
line coupler.
3. Ensure the 9-hole gasket is placed between
the Extension and 9-Tube Lead coupler
pins. The gasket must be in place to seal
the connection and prevent leakage.
4. Align the coupler pins of the Lead with the
coupler pins of the 9-Tube Extension and
connect the assemblies.
5. Slide the coupler casing over the connection
and screw each coupler nut into each end of
the casing. Tighten the coupler nuts to
secure the connection.