Flavor Burst TS 44BEV, Руководство пользователя

Страница: 56 / 100

55
Recommended Mounting Positions for the
Blending System
The Suspension Bracket helps stabilize the
Blending Assembly on the freezer. When
properly installed on the freezer, the Bracket
should hold the Blending Assembly level
horizontally, with the Blending Head lined up
directly under the Spout Adapter. The
Suspension Bracket is adjustable to fit many
common freezer models. Additional
Suspension Bracket styles may be available for
other freezer models through your distributor.
The Blending Assembly can be mounted to
either side of the freezer spout. The 9-Tube
Assembly may also come from either side,
regardless of the Blending
Assembly’s position.
However, on single freezer models, the
following position is highly recommended.
RECOMMENDED POSITIONING:
(A) When installing on separate freezers, install
the Blending Assembly on the opposite side
of the 9-
Tube Assembly’s placement.
Placing the Drive Motor opposite from the 9-
Tube Assembly makes it easier to attach
and remove the 9-Tube Assembly when
cleaning.
(B) When installing on separate freezers, install
each 9-Tube Assembly on the side of the
freezer with the INTAKE vents, with the rest
of the Blending Assembly on the opposite
side. Typically, the intake vents are on the
right side on Taylor 430 models, and left
side for Taylor 428 models. If the 9-Tube
Assembly is installed on the side of the
outtake vents, the warm air could heat the
syrup and melt the base product upon
serving. Installing the 9-Tube Assembly on
the intake vent side keeps the product cool
and consistent.
(C) When installing on a single multi-barrel
freezer, install each 9-Tube Assembly on
either side. If possible, the Drive Motors
should be towards the center of the freezer,
opposite the 9-Tube Assemblies as shown
in Position “A” above. But they can also be
installed to the outside of the freezer as
shown below if space is limited.