Fisher Scientific accuSpin 3, Руководство по эксплуатации

Страница: 46 / 82

Operation
42
Working with programs
The 4 program selection keys offer the option of storing
and recalling the individual centrifugation processes.
Program display
By actuating one of the program selection keys the
specific set point values stored are displayed.
Entering/changing a program
All program places have been factory-set at the same
values.
To change these values, proceed as follows:
−
Entering the desired parameters
→
only the selection panel affected by the changes is flashing.
−
After entering all set point values the desired pro-
gram selection key has to be pressed for approx. 3
seconds:
→
the new program is being stored .
Repeat the process to set values to additional program
places.
Centrifuging with a program
After closing the centrifuge lid, call the desired program
memory number using the program selection key and
press the start key .
If the rotor is started with a program the speed or RCF
set point value of which exceeds the permissible one
for the inserted rotor or the RCF/set point of which is
below the rotor-specific minimum, the program selec-
tion keys LED of the program chosen beforehand will
be switched off after the rotor identification.