First Degree Fitness Fluid FR S-350, Руководство пользователя

Страница: 7 / 24

Step 11. Insert the front of the handle
catch bar (S-bend) into the foot plate.
Step 10. Bolt the rear to the upper
frame. (M10X80mmbolt, Nylock nut and 2
washers)
Note: When standing the S-350 for storage,
(shown left) first tilt the upper frame forward
slightly to release the s-bend bar catch and
then undo the frame tensioning bolt. This will
allow the seat rail to fold vertically as shown
left.
Keep fingers clear of pivoting
parts while moving the seat rail to
the vertical position.
WARNING
Note: A safety strap is located on the bot-
tom of the foot plate. Use this to secure the
seat rail in the upright position when storing
the S-350.
Step 8. Install the rear leg assembly to
the seat rails using M10X47.5 bolts,
M6X20 Allen key screws and
4x10mm/4x6mm washers.
Step 9. With the tensioning bolt, seat
and rear leg in place you may lower the
S-350 to its operating position and con-
tinue with the final steps of assembly.
Assembly Instructions
Vertical
Storage
Position.
Caution: Do not transport the S-350 in
the vertical storage position as shown
right.