Finn HydroSeeder T170 ML, Инструкция оператора и каталог запасных частей

Страница: 19 / 95

13
EMERGENCY STOP
EMERGENCY STOP
EQUIPMENT
A critical safety component of
this equipment is the Emergency
Stop (E-Stop) switch. This device
is located next to the control
panel, and the button is colored
red to be visible and to indicate
a "stop" function based on color
association. The button is made
increasingly visible and distinct by
the bright yellow plastic enclosure
that the button sits on.
The button extends outward
from the enclosure’s surface.
The E-Stop will cut all power
to the machine when pushed
(engaged). E-Stop devices should
NEVER be disabled under any
circumstances.
EMERGENCY STOP USE
When the E-Stop button is pushed (engaged), it will override all other functions and machine
operating modes. The objective of the E-Stop is to remove power as quickly as possible from the
equipment without creating additional hazards.
Emergency stop devices are considered complimentary or secondary safeguarding equipment.
They are not considered primary safeguarding devices because they do not prevent access to a
hazard nor do they detect access to a hazard.
Remember that SAFETY is FIRST in working with any piece of equipment.

As operating personnel change, full training and complete understanding of this equipment
must be given to the personnel prior to their operation of the equipment.

Manufacturer and its agents disclaim any liability on such equipment operating without adhering
to the aforementioned safety procedures.
Once pushed or engaged, the E-Stop will prevent the operation of this unit. Until the button is
turned clockwise (released) and returned to its original position, the E-Stop will still be engaged.
The E-Stop effectively turns OFF this equipment. After the E-Stop is released, follow the Starting
Procedure to resume use of this equipment.