Manuale di Installazione Uso e Manutenzione - Installation, Use and
Maintenance Manual
pag.
26
17 - INSTALLAZIONE ACCESSORI
17 - ACCESSORIES INStALLAtION
Pannello di comando Touch Screen - PTS
Il pannello è fornito completo di cavo lungo 5 metri e connettori per
il collegamento alla scheda elettronica a bordo macchina. Se neces-
sario, si può utilizzare un cavo più lungo a carico dell’installatore. Si
veda il capitolo 11 per i dettagli della connessione alla scheda elet-
tronica.
Il dispositivo può essere fissato alla parete utilizzando la maschera
in dotazione: vedere la figura di seguito.
touch screen controller - ptS
The panel is supplied with a 5 meter long cable and connectors for con-
nection to the electronic board on the machine. If necessary, a longer
cable can be used (provided by the installer). See chapter 11 for details
of the connection to the electronic board.
The device can be fixed to the wall using the plastic jig supplied: see the
figure below.
PRIMA DI INTRAPRENDERE QUALSIASI OPERAZIONE DI INSTALLA-
ZIONE ASSICURARSI CHE LA MACCHINA SIA SPENTA E CHE NON
POSSA ESSERE ACCIDENTALMENTE COLLEGATA ALLA CORREN-
TE ELETTRICA. E’ QUINDI NECESSARIO TOGLIERE L’ALIMENTA-
ZIONE ELETTRICA.
BEFORE UNDERtAKING WHICHEVER INStALLAtION OpERAtION
MAKE SURE tHAt tHE MACHINE IS SWItCH OFF AND tHAt It CAN
NOt BE ACCIDENtALLY CONNECtED tO tHE pOWER. It IS tHE-
REFORE NECESSARY tO CUt OFF tHE ELECtRIC SUppLY DURING
ALL MAINtENANCE.
Sensore di CO
2
da parete - QSW
Il Sensore CO
2
è fornito completo di cavo lungo 5 metri e connetto-
ri per il collegamento alla scheda elettronica a bordo macchina. Se
necessario, si può utilizzare un cavo più lungo a carico dell’installa-
tore. Si veda il capitolo 11 per i dettagli della connessione alla sche-
da elettronica.
Il dispositivo va installato nell’ambiente di maggior frequentazione
delle persone; può essere fissato alla parete utilizzando la masche-
ra in dotazione: vedere la figura di seguito.
CO
2
wall mount sensor - QSW
The CO
2
sensor comes complete with a 5 metre long cable and con-
nectors for connection to the electronic board on the machine. If
necessary, a longer cable can be used to load the installer. See
Chapter 11 For details of the connection to the electronic card.
The device should be installed in the room where live most of peo-
ple ; it can be fixed to the wall using the mask provided: see the figu-
re below.
DC MAN I 05 000 MCH 00_I 10/01/2018 14.40 Pagina 27