Ferrari Costruzioni Meccaniche GREENCAM TSA-40, Инструкция по эксплуатации и техническому обслуживанию

Страница: 25 / 80

OPERATING INSTRUCTIONS AND MAINTENANCE 2020
Pagina 25 di 80
SECTION 6
ATTACHEMENT A
AUTOMATIC DRIVING SYSTEM
INDEX
1. Safety
1.1 Safety recommendation
1.2 Safety indications collected in this guide
1.3 Safety dispositions
2. Driving and visualizations elements
2.1 CULTI CAM application
2.2 Main menu
2.3 Menu Application settings
2.4 Menu general settings
3. Camera settings
3.1 Setting up the camera
3.2 Adjustment of the camera height
3.3 Adjustment of the camera angle
3.4
Automatic measurement of camera height and angle
3.5 Automatic camera height control
4. Employment
3.4
Use in the field
3.5 Setting of rows
3.6 Dual Offset
5 Drawbacks and remedies
6
Maintenance
1. Safety
1.1 Safety tips
1.1.1 Observing
In addition to the instructions in this user manual, observe the
general safety and accident prevention instructions..
In case of non-compliance with safety standards.
Death or serious injury.
•
Before activation, read and comply with the user manual
and, in particular, the safety instructions. This applies to all
persons who use the product or machine, perform
maintenance, repair or inspection.
When using spare parts, accessories and complementary tools
that have not been tested or approved by CLAAS. Vehicle
operation, driving and work safety are limited. CLAAS declines
all liability for related damages with the use of components,
tools, etcetera which are not attributed to CLAAS or not
approved to it.
•
Use spare parts, fittings and further original tools CLAAS.
As operator, you are responsible of the safe use of the
machine, also in the case of automatic driving.
Death or serious injury.
•
It is mandatory to pay continuously attention and t watch
over.
•
During the guide in driving automatic mode, observe
always the entire trajectory and working area.
Drive car with the automatic control.
Death or serious injury.
•
Do not ever use the automatic control on the road.
•
Use the automatic control only for the functions which is
destinate for.
•
When the automatic control is activated, no one should
stand less than 50 m far from the machine
•
Also, when the automatic control is activated, verify the
absence of obstacles on the path
•
Automatic control system job has to be made only by
authorized garages.
Unexpected machine movements risks.
Death or serious injury.
•
For movements on the road, the product has to be
disconnected and it has not to be connected.