Ferrari Costruzioni Meccaniche GREENCAM TSA-40, Инструкция по эксплуатации и техническому обслуживанию

Страница: 15 / 80

OPERATING INSTRUCTIONS AND MAINTENANCE 2020
Pagina 15 di 80
The application for a driving licence for exceptional agricultural
machinery must be accompanied by a photocopy of the
registration certificate and the applicant’s identification details,
signed by the owner of the vehicle and indicate the
municipalities in whose territory the circulation takes place.
The driver of the agricultural machinery must always have with
him the authorization to show, on request, to the bodies
responsible for road surveillance, under penalty of an
administrative penalty.
•
The equipment carried (weeding machine) must be
equipped with concealing devices to conceal the tractor’s
visual signalling or illumination devices to which it is
connected by its shape; such devices may be mounted on a
removable support.
•
Agricultural machinery, which for operational reasons
exceeds the limit dimensions mentioned above, must be
fitted at the rear with a detachable panel 0,5 mx0,5 m in
alternating red and white stripes, of retro-reflective
material approved by the civil motor vehicle. Good rules
for the safety of the operator during transport are to adapt
the speed of transport to road conditions and traffic (The
maximum speed allowed is 25 Km/h);
The application for a driving licence for exceptional agricultural
machinery must be accompanied by a photocopy of the
registration certificate and the applicant’s identification details,
signed by the owner of the vehicle and indicate the
municipalities in whose territory the circulation takes place.
The driver of the agricultural machinery must always have with
him the authorization to show, on request, to the bodies
responsible for road surveillance, under penalty of an
administrative penalty.
•
The equipment carried (weeding machine) must be
equipped with concealing devices to conceal the tracto
r’s
visual signalling or illumination devices to which it is
connected by its shape; such devices may be mounted on a
removable support.
•
Agricultural machinery, which for operational reasons
exceeds the limit dimensions mentioned above, must be
fitted at the rear with a detachable panel 0,5 mx0,5 m in
alternating red and white stripes, of retro-reflective
material approved by the civil motor vehicle. Good rules
for the safety of the operator during transport are to adapt
the speed of transport to road conditions and traffic (The
maximum speed allowed is 25 Km/h);
It is clarified that the weeding machine is excluded from the
verification of the requirements for the approval as reported
by the Technical Regulations of the Highway Code (D.P.R.
16/12/92 nr. 495), in particular by art. 292.
No responsibility can be identified at the expense of the
producer, no type-approval has been
granted for this type of agricultural machinery and the total
length of the rear overhang and the total length of the tractor
which will be connected to the machinery cannot be foreseen.
As a result, it is the responsibility of the user to verify the
above points to analyse the problems of road transport.
It is clarified that the weeding machine is excluded from the
verification of the requirements for the approval as reported
by the Technical Regulations of the Highway Code (D.P.R.
16/12/92 nr. 495), in particular by art. 292.
No responsibility can be identified at the expense of the
producer, no type-approval has been granted for this type of
agricultural machinery and the total length of the rear
overhang and the total length of the tractor which will be
connected to the machinery cannot be foreseen.
As a result, it is the responsibility of the user to verify the
above points to analyse the problems of road transport.
3.5 ADJUSTMENT AND USE OF THE MACHINE IN THE
FIELD
After attaching the machine to the tractor, when the lift is fully
raised, the sensor located just below the 3
rd
point should be
excited.
Proceed by mounting the monitor in the cab of the tractor
using the appropriate brackets.
Then connect the cables: monitor (4) and connection cable of
the cam (2), then cable "T"; last power 12 V.