Ferrari Costruzioni Meccaniche GREENCAM TSA-40, Инструкция по эксплуатации и техническому обслуживанию

Страница: 64 / 80

OPERATING INSTRUCTIONS AND MAINTENANCE 2020
Pagina 64 di 80
4.3.2 Activation of the Dual Offset
Possibility of setting up:
•
M - Dual Manual Offset (1), present.
A - Automatic dual offset (2).
►
Call up the <General Settings> menu.
►
Tap the selection box (1) or (2).
The selection window opens.
►
Select and confirm the selection box.
The checkmark in the selection box (1) or (2) shows which function is enabled.
If the function is activated here, it is available in the menu <Automatic Control>.
4.3.3 Configuration of the automatic <Dual Offset function>
Valid for: CULTI CAM Professional
Set the control logic for the automatic shift of the manual shift.
To avoid undesirable changes in manual movement, f
or example the tool took is lifted even if not planned, it’s necessary to settle
the <Lowering Time> and the <Lifting Time> on an appropriate value.