Ferrari Costruzioni Meccaniche GREENCAM TSA-40, Инструкция по эксплуатации и техническому обслуживанию

Страница: 17 / 80

OPERATING INSTRUCTIONS AND MAINTENANCE 2020
Pagina 17 di 80
Fat type : grade 0 biodegradable vegetable-based mineral (e.g.
Agip Eco Grease) or equivalent.
•
Check the tightening of nuts and screws.
•
Check the wear status of the parts working in contact
with the ground (replace them before they start to
wear out).
•
Ensure that the oil in the tractor’s hydraulic system is
still suitable for use. Replace it if it has excess
impurities, as these could cause problems to the
valves of the machine.
Spare parts shall conform to the standards and characteristics
defined by the manufacturer.
Use only spare parts FERRARI COSTRUZIONI MECCANICHE Srl.
4.1 SEASONAL REST
At the end of the season, or if there is a long rest period, it is
advisable to:
- Wash the equipment thoroughly with water and then dry.
- Check thoroughly and, where appropriate, replace damaged
or worn parts.
- Tighten all screws and bolts thoroughly.
- Protect the equipment with a cloth.
- Finally, place it in a dry, stable and outdoor environment from
the reach of the uninitiated.
If these operations are done with care, the advantage will be
only to the user as to the resumption of work, will find an
equipment in perfect condition.
•
Place support feet appropriately.
•
Ensure the stability of the tool.
•
Protect pipe ends fittings using the caps supplied.
At the end of the season, or if there is a long rest period, it is
advisable to:
- Wash the equipment thoroughly with water and then dry.
- Check thoroughly and, where appropriate, replace damaged
or worn parts.
- Tighten all screws and bolts thoroughly.
- Protect the equipment with a cloth.
- Finally, place it in a dry, stable and outdoor environment from
the reach of the uninitiated.
If these operations are done with care, the advantage will be
only to the user as to the resumption of work, will find an
equipment in perfect condition.
•
Place support feet appropriately.
•
Ensure the stability of the tool.
•
Protect pipe ends fittings using the caps supplied.
4.2 DISPOSAL
Waste and lubrication products must be disposed of
responsibly and safely. For information on how to dispose of
waste, please contact your local health unit or an authorised
waste disposal company.
SECTION 5
Spare parts
Orders for spare parts must be placed directly with
FERRARI
COSTRUZIONI MECCANICHE SRL - STRADA SQUADRI,
GUIDIZZOLO (MN)
and must contain the following information:
- Model, Code and Serial Number of the equipment . These
data are marked on the plate of each equipment.
-
Description of the detail and quantity requested. Transport
costs are always to be borne by the consignee. The goods
travel at the risk and danger of the customer even if sold at
random.