Fenix Imvico SM3000, Руководство по эксплуатации

Страница: 39 / 55

FENIX IMVICO SM3000 OPERATION MANUAL
GS k m n d1...dn
[Name] Print bar code
[Format] ASCII GS k m n d 1... dn
Hex 1D 6B m n d 1... dn
Decimal 29 107 m n d 1... dn
[Range] 65
≤
m
≤
73 ( n and d depends on the bar code system used)
[Description] Selects a bar code system and prints the bar code.
m selects a bar code system as follows:
m Bar Code System Number of Characters Remarks
<43>H JAN13(EAN13)
n = 12 48
≤
d
≤
57
<45>H CODE39
1
≤
n
≤
255 48
≤
d
≤
57, 69
≤
d
≤
90, 32, 36,
37, 43, 45, 46, 47
<46>H ITF
1
≤
n
≤
255(even number) 48
≤
d
≤
57
<49>H CODE128
2
≤
n
≤
255 0
≤
d
≤
127
[Notes]
•
n indicates the number of bar code data, and the printer processes n bytes from the next
character data as bar code data.
•
If n is outside of the specified range, the printer stops command processing and processes
the following data as normal data.
•
If d is outside of the specified range, the printer only feeds paper and process the following
data as normal data.
•
If the horizontal size exceeds printing area, the printer only feeds the paper.
•
This command feeds as much paper as is required to print the bar code, regardless of the
line spacing specified by
ESC 2 or ESC 3 .
•
This command is enabled only when no data exists in the print buffer. When data exists in
the print buffer, the printer processes the data following
m as normal data.
•
After printing bar code, this command sets the print position to the beginning of the line.
•
This command is not affected by print modes (emphasized, double-strike, underline,
character size, white/black reverse printing, or 90
°
rotated character, etc.), except for
upside-down printing mode.
•
When the system of bar code is used JAN13(EAN13), the printer prints the bar code after
receiving 12 bytes of data of the bar code and processes the following data like normal data.
•
The number of data for code ITF must be even numbers. When an uneven number of byte
of data is introduced, the printer ignores the command.
•
When using the CODE 128 in this printer, take the following points into account for data
transmission:
 The top of the bar code data string must be code set selection character (any of
CODE A, CODE B or CODE C) which selects the first code set.
 Special characters are defined by combining two characters "{" and one character.
The ASCII character "{" is defined by transmitting "{" twice consecutively.
Specific character Transmit data
ASCII Hex
SHIFT {S 7B, 53 123, 83
CODE A {A 7B, 41 123, 65
CODE B {B 7B, 42 123, 66
CODE C {C 7B, 43 123,67
FNC1 {1 7B, 31 123, 49
FNC2 {2 7B,32 123, 50
FNC3 {3 7B, 33 123,51
FNC4 {4 7B,34 123, 52
“{“ {{ 7B, 7B 123, 123
39/55