FENIX IMVICO
SM3000 OPERATION MANUAL
ESC
-
n
[Name]
Turn underline mode on/off
[Format]
ASCII
ESC
-
n
Hex
1B
2D
n
Decimal
27
45
n
[Range]
0
≤
n
≤
2, 48
≤
n
≤
50
[Description]
Turns underline mode on or off, based on the following values of
n
:
n
Function
0, 48
Turns off underline mode
1, 49
Turns on underline mode (1-dot thick)
2,50
Turns on underline mode (2-dots thick)
[Notes]
•
The printer can underline all characters (including right-side character spacing), but cannot
underline the space set by Horizontal tab.
•
When underline mode id turned off by setting the value of
n
to 0 or 48, the following data is
not underlined, and the underline thickness set before the mode is turned off does not
change. The default underline thickness is 1 dot.
•
Changing the character size does not affect the current underline thickness.
•
Underline mode can also be turned on or off by using
ESC !
. Note, however, that the last
received command is effective.
[Default]
n
= 0
[Reference]
ESC !
ESC 2
[Name]
Select default line spacing
[Format]
ASCII
ESC
2
Hex
1B
32
Decimal
27
50
[Description]
Selects approximately 4,25 mm spacing.
[Reference]
ESC 3
ESC 3
n
[Name]
Set line spacing
[Format]
ASCII
ESC
3
n
Hex
1B
33
n
Decimal
27
51
n
[Range]
0
≤
n
≤
255
[Description]
Sets the line spacing to
[
n
x horizontal or vertical motion units].
[Notes]
•
The maximum paper feed amount is 1016 mm. Even if a paper feed amount of more
than 1016 mm is set, the printer feeds the paper only 1016 mm.
[Reference]
ESC 2
ESC @
[Name]
Initialize printer
[Format]
ASCII
ESC
@
Hex
1B
40
Decimal
27
64
[Description]
Clears the data in the print buffer and resets the printer mode to the mode that was in
effect when the power was turned on.
[Notes]
•
The NV bit image data is not cleared.
28/55
