FENIX IMVICO
SM3000 OPERATION MANUAL
2) When any of these errors happen, the ERROR LED blinks with a different blinking timing
sequence for each of them. This fact allows the final user to understand, by visual inspection,
the error that had happened.
ERROR
Sequence
PAPER NEAR
END
COINS DRAWER
OPEN
HARDWARE
CUTTER
POWER SUPPLY
(VP)
TEMPERATURE
Fig. 3.6-
Blinking sequence of the ERROR LED.
More information on these errors can be found below:
‘Paper near-end’ error
[Description]
This error happens when the ‘paper near-end’ sensor detects that the paper roll is
close to be finished. This means that using a paper roll with an external diameter of
100 mm and inner diameter of 25 mm, the sensor will trigger the error when there are
still 1.5 meters of paper approx.
This indication should be really taken as a warning, not as an error as such. The action
depends on the application and the developer’s criteria.
[Recover action] Replace paper roll.
[Notes]
When this error happens the printing is not interrupted, although using the ESC c 4
command could stop it. This error is different from the ‘out of paper’ error.
Coins drawer open error
[Description]
This error happens when the coins drawer is open.
This indication should be really taken as a warning, not as an error as such. The action
depends on the application and the developer’s criteria.
[Recover action] Closing the coins drawer.
19/55
t
Led ON
Led OFF
t
Led ON
Led OFF
t
Led ON
Led OFF
t
Led ON
Led OFF
t
Led ON
Led OFF
t
Led ON
Led OFF
