FENIX IMVICO
SM3000 OPERATION MANUAL
1 –
GENERAL SPECIFICATIONS
1.1- Printing specifications
1) Printing method:
Thermal line printing
2) Dot density:203 dpi x 203 dpi
(‘dpi’: dots per inch. 1 inch=25.4mm)
(203 dpi= 8 dots per mm)
3) Printing direction:
Unidirectional with friction feed.
4) Printing width:
72 mm (576 dots).
5) Printing speed:
High speed mode: up to 220mm/s
(The printing speed could vary automatically depending on the print
head temperature as well as the command processing and the data
transmission speed).
NOTES:
Printing speed depends on the data transmission interface, the combination of
control commands and the print head temperature.
Low printing speed could cause intermittent printing. It is recommended to transmit
data to the printer as quickly as possible.
6) Paper feed speed:
220 mm/s (continuous paper feed)
7) Characters per line (by default):
A font:
42
B font:
56
8) Space between characters (by default):
2 dots (0.25 mm)
9) Line spacing (by default):
4.25 mm
1.2- Character specifications
1) Number of characters:
Alphanumeric characters:
95
Extended graphics:
128 per page
2) Character structure:A font: 12 x 24 dots (1.5 x 3 mm).
B font: 8 x 16 dots (1 x 2 mm).
A font is selected by default.
3) Character size:
Standard
Double height
Double width
Double width/
Double height
cpl
W x H
(mm)
cpl
W x H
(mm)
cpl
W x H
(mm)
cpl
W x H
(mm)
A Font
1,5 x 3
42
1,5 x 6
42
3 x 3
21
3 x 6
21
B Font
1 x 2
56
1 x 4
56
2 x 2
28
2 x 4
28
The space between the characters is not included.
Characters can be scaled up to 64 times bigger than their normal size.
cpl: characters per line.
7/55
