FENIX IMVICO
SM3000 OPERATION MANUAL
ESC
m
[Name]
Partial Cut
[Format]
ASCII
ESC
m
Hex
1B
6d
Decimal
27
109
[Description]
Cuts the paper partially in the current position.
[Notes]
● The interval between each cutting operation must be two seconds or more.
ESC
t
n
[Name]
Select character code font
[Format]
ASCII
ESC
t
n
Hex
1B
74
n
Decimal
27
116
n
[Range]
<00>H
≤
n
≤
<03>H, <30>H
≤
n
≤
<33>H
[Description]
Selects the character fonts between the internal character fonts and the Windows
loaded character fonts.
n
Character font selected
<00>H / <30>H Both internal font A and font B are selected.
<01>H / <31>H
External loaded font A is selected.
Internal font B is selected.
<02>H / <32>H
External loaded font B is selected.
Internal font A is selected.
<03>H / <33>H Both external loaded font A and font B are selected.
[Default]
n
= <30>H
[Reference]
APPENDIX D
.
ESC
{ n
[Name]
Inverse printing mode
[Format]
ASCII
ESC
{
n
Hex
1B
7B
n
Decimal
27 123
n
[Range]
<00>H
≤
n
≤
<FF>H
[Description]
Turns inverse printing mode on/off. When the LSB of
n
is 0, Inverse printing mode off.
When the LSB of
n
is 1, Inverse printing mode on.
[Notes]
● Each character is printed upside down (180º rotating) and the sequence of characters
is printed backwards as well. The character sent fist is printed at the right margin and
subsequent characters are printed from right to left. The characters lines transmission
order changes from the normal mode, because the first line is sent to the printer must
be the last to appear on the ticket, and the last line is sent must be the first to appear
on the ticket.
● When inverse mode is setting, the rotated mode (90º) is disabled.
● This command is enabled only when processed at the beginning of a line.
[Default]
n
= <00>H
32/55
A B C D
1 2 3 4 5
A B
C D
1 2 3
4 5
Paper
feed
direction
Inverse printing
mode
OFF
Inverse printing
mode
ON
