FENIX IMVICO
SM3000 OPERATION MANUAL
LF
[Name]
Print and line feed
[Format]
ASCII
LF
Hex
0A
Decimal 10
[Description]
Prints the data in the print buffer and feeds one line based on the current line spacing.
[Notes]
This command sets the print position to the beginning of the line.
[Reference]
ESC 2
,
ESC 3
.
CR
[Name]
Print and carriage return
[Format]
ASCII
CR
Hex
0D
Decimal
13
[Description]
When automatic line feed is enabled, this command functions the same as
LF
; when
automatic line feed is disabled, this command is ignored.
[Notes]
•
Sets the print starting position to the beginning of the line.
•
The automatic line feed is ignored with a serial interface model.
•
This command is set according to the DIP switch 1-1 setting with a parallel interface model.
[Reference]
LF
DLE EOT
n
[Name]
Real-time status transmission
[Format]
ASCII
DLE EOT
n
Hex
10 04
n
Decimal
16 4
n
[Range]
<01>H
≤
n
≤
<04>H
[Description]
Transmits the selected printer status specified by
n
in real-time, according to the
following parameters:
n
= <01>H: Transmit printer status
n
= <02>H: Transmit offline status
n
= <03>H: Transmit error status
n
= <04>H: Transmit paper roll sensor status
[Notes]
•
The status is transmitted whenever the data sequence of <10>H<04>H<
n
>(1<
n
< 4) is
received.
•
The printer transmits the current status. Each status is represented by one-byte data.
•
The printer transmits the status without confirming whether the host computer can receive
data (serial interface).
•
This command is executed even when the printer is offline, the receiver buffer is full, or
there is an error status with a serial interface model.
n
= <01>H: Printer status
Bit OFF/ON Function
0
OFF
Not used. Fixed to OFF
1
ON
Not used. Fixed to ON
2
OFF
Not used. Fixed to OFF
3
OFF
Online
ON
Offline
4
ON
Not used. Fixed to ON
5
OFF
Does not wait for online error recovery
ON
Waits for online error recovery
6
*
ON/OFF Ticket completed
7
OFF
Not used. Fixed to OFF
23/55
