FENDT FORMER 12545 PRO, Руководство оператора, Страница: 71 / 76

Maintenance
FORMER 12545 PRO 69
10.9 Tire maintenance
10.9.1 Changing wheels
WARNING
Risk of injury when working on the
tires
Incorrectly performed mainte-
nance work can cause acci-
dents.
 Ensure that maintenance work is only
carried out by trained personnel or a
specialist workshop.
 Check tires for damage and wear.
 If necessary, have the tires changed at
a specialist workshop.
10.9.2 Tire pressure
 Check the tire pressure regularly.
 Always observe the prescribed tire
pressure. (see Section 5.2 Tires)
Excessive or insufficient tire pressure may
affect the quality of the forage.
For smoother running, you can reduce the
tire pressure of the rotor chassis to 1 bar.
10.10 Lubrication instructions
No. Lubrication point Num
ber Inter-
val Type of
maintenance Quantity Lubricant
1 Frame tube hinge axis 1 50h Lubricate As required Multipurpose
grease
2 Trailer bracket hinge axis 1 50h Lubricate As required Multipurpose
grease
3 Bearing housing 1 50h Lubricate As required Multipurpose
grease
4 Front swivel arm hinge axis 4 50h Lubricate As required Multipurpose
grease
5 Front swivel arm hydraulic cyl-
inder 2 50h Lubricate As required Multipurpose
grease
6 Twin wheel swivel axle 4 50h Lubricate As required Multipurpose
grease
7 Axle guide 4 50h Lubricate 1) 3 cm 3 Multipurpose
grease
8 Swath formation adjustment
mechanism 4 50h Lubricate 1) 10 cm 3 Multipurpose
grease