FENDT FORMER 12545 PRO, Руководство оператора, Страница: 30 / 76

ISOBUS control system
28 FORMER 12545 PRO
"User Setup" menu function section
Position Designation Description
1 Selection of the speed
signal source
-
Choose between no speed signal, transmission speed
and radar signal
2 Speed signal source
-
Displays either the source of the selected speed signal or
"No signal available" if no signal can be found
3 Working width
-
For entering the average working width to calculate the
number of hectares that have been processed
4 Sequential control time
-
Only available when no speed signal is available
-
For setting the time offset between the front rotors being
lifted and the rear rotors being lifted
5 Lifting offset
-
For adjusting the time offset between the rear rotors be-
ing raised, depending on the route being driven or the set
sequential control time
6 Lowering offset
-
For adjusting the time offset between the rear rotors be-
ing lowered, depending on the route being driven or the
set sequential control time
System status
-
Action is being carried out
-
After the action is completed, this sym-
bol is hidden
4.3.8 "Manual Operation" menu
The machine is operated manually in the "Manual Operation" menu.