FENDT FORMER 12545 PRO, Руководство оператора, Страница: 58 / 76

Using the machine
56 FORMER 12545 PRO
"User Setup" menu
 Select the "User Setup" menu.
 Select the speed signal in the drop-
down list (1).
Speed signal Sequential control
Transmission speed Depending on the
meters driven
Radar signal Depending on the
meters driven
No speed signal Time-dependent
If time-dependent:
 Enter the time interval for lifting in the
field (2).
Maximum value: 20 s
If dependent on time or meters driven:
 Enter the offset for lifting in the field (3).
Maximum value: 300%
 Enter the offset for lowering in the field
(4).
Maximum value: 300%
7.7.9 Setting the two-rotor opera-
tion mode
In the two-rotor operation mode, both rear
rotors are used. The front rotors remain in
the transport position.
 Select the "Transport" menu.
 Press and hold the "Un-
lock" button for three sec-
onds.
 Press the "Lower rear ro-
tors" button.
The rear rotors are lowered into the head-
land position.
The front rotors are locked to prevent low-
ering.
7.7.10 Setting individual rotor opera-
tion mode
In the "Lifting/Lowering" menu, the machine
can be set to use from one rotor to all ro-
tors.
 Select the "Lifting/Lowering" menu.
From headland position
 Press one of the following buttons to
lower the rotor to be used into the work-
ing position.
Button Function
Lower front
rotors Lowers the two
front rotors
Lower rear ro-
tors Lowers the two
rear rotors
Lower individ-
ual rotor Lowers the cor-
responding ro-
tor
From the working position
 Press one of the following buttons to lift
the rotors that are not to be used into
the headland position.
Button Function
Lift front ro-
tors Lifts the two
front rotors
Lift rear rotors Lifts the two
rear rotors
Lift individual
rotors Lifts the corre-
sponding rotors