FENDT FORMER 12545 PRO, Руководство оператора, Страница: 63 / 76

Rectifying faults
FORMER 12545 PRO 61

Use the checkboxes to select the rotors
to be lifted.

Press the "Lift rotors" button until the
rotors are fully raised.
The automatic limit is deactivated.
9.2.2 Lowering rotors into working
position
 Select the "Manual Operation" menu.
 Use the checkboxes to select the rotors
to be lowered.
 Press the "Lower rotor" button until the
rotors are fully lowered.
The automatic limit is deactivated.
9.2.3 Lifting rotors into the head-
land position
 Select the "Manual Operation" menu.
 Use the checkboxes to select the rotors
to be lifted.
 Press the "Lift rotors" button until the
rotors are raised into the headland posi-
tion.
The automatic limit is deactivated.
9.2.4 Setting the working width in
emergency operation
 Select the "Manual Operation" menu.
 Use the checkboxes to select the two
front rotors.
 Press the "Increase width" button until
the desired width is reached.
 Press the "Decrease width" button until
the desired width is reached.
The minimum working width must be set for
the transport position.
9.2.5 Setting the swath width in
emergency operation
 Select the "Manual Operation" menu.
 Use the checkboxes to select the two
rear rotors.
 Press the "Increase width" button until
the desired width is reached.

Press the "Decrease width" button until
the desired width is reached.
9.2.6 Setting the working height in
emergency operation
 Select the "Manual Operation" menu.
 Use the checkboxes to select the rotors
for which the working height is to be ad-
justed.
 Press the "Increase working height"
button until the desired working height
is reached.
 Press the "Decrease working height"
button until the desired working height
is reached.
The automatic limit is deactivated.