FENDT FORMER 12545 PRO, Руководство оператора, Страница: 53 / 76

Using the machine
FORMER 12545 PRO 51
Removing the transmission shaft

Remove the transmission shaft (1) from
the tractor.
 Hang the transmission shaft on the
trailer bracket (3) with the retaining
chain (2).
 Disconnect the 7-pin plug of the lighting
cable and insert it in the storage holder
on the machine.
 Disconnect the 9-pin plug of the
ISOBUS control unit and insert it in the
storage holder on the machine.
 Disconnect the hydraulic hoses and in-
sert them in the storage holder on the
machine.
Storing the brake coupling heads
 First disconnect the red brake coupling
head.

Then disconnect the yellow coupling
head.

Fasten the coupling heads to the
dummy couplings in the storage area.

Release the catch hooks on the lower
links.
 Lower the lower links until the lower link
balls are detached from the lower links
of the tractor.
 Remove the lower link balls from the
lower link pins.
Lock to prevent unauthorized use

Secure the machine against unauthor-
ized use by attaching a lock to the
lower link pin.
7.7 Settings
7.7.1 Adjusting the swath width
The swath width is set in the "Working
Setup" menu.
The swath width can be set from 1.20 m to
2.20 m.

Select the "Working Setup" menu

Press the "Increase swath
width" button until the de-
sired swath width is set.
 Press the "Decrease swath
width" button until the de-
sired swath width is set.
7.7.2 Set working width
The working width is set in the "Working
Setup" menu.