background image

4

5

STEP 4

Attach the Platform
•    Slide the platform onto the tower pole and secure it with four M6x12mm bolts and the M4x55mm Allen Key. 

STEP 8 

Setup Cable Management
•  

 

Engage the lever to raise the platform to the highest position.

•  

 

Adhere two cable clips under the Platform (refer to picture for 
specific locations).

•   Route the keyboard and mouse cords through the openings in the 
   keyboard  platform.

•  

 

Neatly guide your cords to the rear of the product. Use the 
additional cable clip in a location that best suites your setup.

STEP 5

Attach VESA Assembly to Tower Pole
•   Option 1: Single Monitor Version
   Unscrew the VESA Knobs from the VESA Assembly. Place the 

bracket on the front-side of the tower pole and the support bar 
on the rear. Tigthen knobs to secure Assembly to pole.

•   Option 2: Dual Monitor Version
   Unscrew the VESA Knobs from the Dual VESA Assembly. Place the 

bracket on the front-side of the tower pole and the dual cross bar 
on the rear. Tighten knobs to secure Dual Assembly to pole.

STEP 6

Attach Monitors
•    Insert two M4x12mm bolts into the top two holes of monitor(s). 

Do not tighten all the way. 

•    Hook the monitor onto the VESA Assembly and add two additional 

M4x12mm bolts to the bottom two holes. Tighten all four bolts.

•    To adjust the VESA Assembly tension remove the plastic cap and 

use the provided 13mm Hex Wrenches 

ASSEMBLY CONTINUED

USAGE GUIDELINES

LOTUS™ VE SIT-STAND 5 YEAR LIMITED WARRANTY

15

45

M

D

A

A

G

G

J

H

STEP 7

Attach the Lever to the Platform
•    Attach the Handle on the left or right side, using two M6x12mm 

bolts and M4x55mm Allen Key.

•   Remove the cable tie from the handle.

H

M

K

L

Fellowes, Inc. (the “Company”) warrants this product to be free from defects in material and workmanship appearing within five (5) years from the date of the original 

purchase of the product. If such a defect appears during the warranty period, the Company will (at its sole option) either repair or replace the defective product with no 

charge for service or parts or refund the purchase price.
This warranty applies only to the initial retail purchaser and does not cover claims resulting from misuse, failure to follow instructions on installation and use, neglect, use 

of unauthorized attachments, commercial use, use on a current or voltage other than specified on the product, or unauthorized service during the warranty period on 

conditions otherwise covered by the warranty.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 

PURPOSE, IS EXPRESSLY LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. 
UNLESS REQUIRED BY APPLICABLE LAW, THE CUSTOMER’S EXCLUSIVE REMEDY FOR BREACH OF THIS WARRANTY OR ANY IMPLIED WARRANTY OR OF ANY OTHER 

OBLIGATION ARISING BY OPERATION OF LAW OR OTHERWISE SHALL BE LIMITED AS SPECIFIED HEREIN TO REPAIR, REPLACEMENT OR A REFUND OF THE PURCHASE PRICE, 

AT THE COMPANY’S SOLE OPTION.
UNDER NO CIRCUMSTANCE WILL THE COMPANY, ITS AFFILIATES, SUBSIDIARIES, RELATED ENTITIES, RESELLERS OR THEIR RESPECTIVE OFFICERS, DIRECTORS OR EMPLOYEES 

OR THOSE PERSONS FOR WHOM THEY ARE BY LAW RESPONSIBLE, BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUSTAINED IN CONNECTION WITH THE 

PRODUCT. THE COMPANY AND THESE OTHER PARTIES DO NOT ASSUME OR AUTHORIZE ANY REPRESENTATIVE OR OTHER PERSON TO ASSUME FOR ANY OF THEM ANY 

OBLIGATION OR LIABILITY OTHER THAN AS IS EXPRESSLY SET FORTH HEREIN.
The duration, terms and conditions of this warranty are valid worldwide, except where different limitations, restrictions or conditions may be required by local law. 
Australia Residents Only:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for 

compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable 

quality and the failure does not amount to a major failure. The benefits under Fellowes’ Warranty are in addition to other rights and remedies under a law in relation to 

the machine.

LotusVE_SitStand_872346__RevC_053018.indd   4-5

6/1/18   10:02 AM

Содержание Lotus VE Sit-Stand























Отзывы: