OBID
®
System-Manual
ID RW40.30-USB
FEIG ELECTRONIC GmbH
Page 22 of 57
H80701-2e-ID-B.doc
CYCL.:
The operation mode of the reader in Auto-Answer-Mode can be defined via the bit
cycle.
0
:
repeating
As soon as a transponder enters the detection field of the reader, the
protocol blocks will be put out via the interface as often as it has been
defined by "
3.2.2. [0x41] Auto-Answer-Mode : number of protocol blocks
". A
new protocol cycle will be executed if the transponder remains inside of the
detection field of the reader or enters it again after the "locking time
reception" t
S
is over.
1:
not repeating
As soon as a transponder is located within the detection range of the
reader, the protocol blocks will be put out via the interface as often as it has
been defined by the "
3.2.2. [0x41] Auto-Answer-Mode : number of protocol
blocks
". For a new output of a protocol block the transponder has to leave
the reception range for the period of the "locking time reception" t
S
.
BCD_SNR:
Defines the data format of the serial number
0
:
Hex-Format
1
:
Hex value transformed into BCD value transmitted in ASCII-format.
EXCL_SNR:
Defines if the TR_TYP shall be transmitted in connection with the BCD transformed
serial number.
0
:
The serial number (S-No.) and the transponder-type (TR_TYPE) are
transmitted.
1:
Only the serial number (S-No.) is transmitted.
