![background image](http://html1.mh-extra.com/html/feig-electronic/obid-i-scan-id-isc-prhd102/obid-i-scan-id-isc-prhd102_manual_3864973028.webp)
OBID
i-scan
®
Manual
ID ISC.PRHD102
FEIG ELECTRONIC GmbH
Page 28 of 125
H71101-2e-ID-B.doc
GRN (DigitalIO.Signaler.LED.Green….State)
BLUE (DigitalIO.Signaler.LED.Blue….State)
BUZZER(DigitalIO.Signaler.Buzzer…..State)
Bit Combination
Signal device
b00
unchanged
b01
on
b10
off
b11
flashing
Startup Buzzer / LED
(only idle state)
(DigitalIO.Signaler.Enable_StartupSignal)
When this option is selected, the Reader will switch the BUZZER and the LEDs
on for two seconds to indicate that the Reader is ready after the Reader is sup-
plied with power. If the Reader is reset by software, only both LEDs switch on for
2 seconds.
IDLE-FLASH / ACTIV-FLASH: (DigitalIO.Signaler….…FlashFrequency)
By means of the two bytes "IDLE-FLASH" and "ACTIV-FLASH" the signal transmitter may be
provided with a flashing frequency for idle and active position.
Bit:
7
6
5
4
3
2
1
0
Function:
0
0
BUZZER
BLUE
GRN
Bit combination
flashing frequency
b11
b10
b01
b00
1 Hz
2 Hz
4 Hz
8 Hz
ACTIV-xxx-TIME (DigitalIO.Signaler……..ActivationTime)
If a Transponder was detected, the transmitter and the duration can be set by the bytes ACTIV-
STATE and ACTIV-FLASH. Each signal transmitter (LED, BUZZER) may be activated temporarily
limited.
Signal transmitter
time range
ACTIV-GRN-TIME
0...255 x 100 ms
ACTIV-BLUE-TIME
0...255 x 100 ms
ACTIV-BUZZER-TIME
0...255 x 100 ms
Содержание OBID i-scan ID ISC PRHD102
Страница 77: ...OBID i scan Manual ID ISC PRHD102 FEIG ELECTRONIC GmbH Page 77 of 125 H71101 2e ID B doc...
Страница 78: ...OBID i scan Manual ID ISC PRHD102 FEIG ELECTRONIC GmbH Page 78 of 125 H71101 2e ID B doc...
Страница 79: ...OBID i scan Manual ID ISC PRHD102 FEIG ELECTRONIC GmbH Page 79 of 125 H71101 2e ID B doc...
Страница 80: ...OBID i scan Manual ID ISC PRHD102 FEIG ELECTRONIC GmbH Page 80 of 125 H71101 2e ID B doc...