![background image](http://html1.mh-extra.com/html/federal-signal-corporation/ultravoice-uv/ultravoice-uv_installation-operation-and-service-manual_3830688013.webp)
13
General Description
Installation, Operation, and Service Manual
UV Controller Overview
The UV controller consists of two cabinets, which are bolted to a mounting channel
for ease of installation. The Control Cabinet (NEMA 4) houses a card cage for easy
installation and maintenance of plug-in cards. The card cage has a capacity of tens cards
consisting as follows:
• One controller position (UV+)
• One accessory position for optional audio and relay module card (UVARM)
• Eight amplifier positions (UV400)
Each UV400 amplifier provides 400 watts to drive any combination of speaker drivers up
to 400 watts. Depending on the number of amplifier cards installed, eight power levels
are available from 400 watts to 3200 watts.
Activation codes, command sequences, and operating parameters are uploaded from a
Windows
®
-based computer through the RS232 port located on the front panel or over
the communication channel with Commander. All information is stored in non-volatile
memory that is immune to power and battery failure.
The amplifiers and optional equipment are all modularly constructed for easy removal.
In most instances, field service is limited to replacing a slide out module; which a non-
technical person can perform with only a screwdriver.
The lower cabinet, which is a vented NEMA 4 style cabinet, houses user-provided
rechargeable batteries. The cabinet houses two or four batteries depending on the number
of amplifiers used. The lower and upper cabinets are interconnected by a conduit, which
is sealed to prevent any harmful vapors from entering the control area. The ac charger or
solar (regulator) maintains the charging of the batteries. The batteries provide power to
the Control Cabinet. The batteries continue providing power to the Control Cabinet in the
event of an ac power failure; typically, the standby minimum is seven days.
The UV400 amplifiers are ordered separately and quantity is based on the type of speaker
array. Refer to the following tables to determine the quantity of amplifiers to order
various siren combinations.
Controllers
Table 1 UV Models and Controller Options
UV Model Name
Description
UVTD
Digital Two-way Radio ready
UVTDH
VHF Radio
UVTDU
UHF Radio
UVTD-IP
Digital Two-way Broadband
Contact your sales representative for stainless steel enclosures and other communication
options.
Содержание ultravoice UV
Страница 42: ...42 Installation UltraVoice UV Figure 15 Omni Antenna Installation Example...
Страница 43: ...43 Installation Installation Operation and Service Manual Figure 16 Antenna Grounding...
Страница 71: ...71 Appendix C Drawings Figure 25 UV Controller Two way Radio Wiring Diagram...
Страница 72: ...72 Figure 26 UVTD IP Broadband Wiring Diagram...