![background image](http://html1.mh-extra.com/html/federal-signal-corporation/i-ip-io/i-ip-io_setup-program-and-user-manual_548264079.webp)
79
Using the Informer-IP
Setup, Program, and User Manual
Federal Signal www.fedsig.com
600-Ohms Audio Output
The 600-ohms audio output is useful for tying the Informer-IP and Informer-PA into
existing public address (PA) systems or other externally amplified speaker systems. The
I-IPSIU audio output is used to interface radio systems. An adjustable balanced audio
output is available at pins 1 and 2 of the output connector. The output level is adjustable
via a potentiometer located near the output connector on the inside of the unit. See the
Informer’s Installation Manual for parts locations. Use of Selectone speakers with E-300CK
can extend the range of an Informer-IP speaker.
Generating Alerts
The Informer-IP can generate up to six different Alerts to alert Emergency Operations
Center (EOC) personnel at the Federal Commander control point. The Commander
provides the EOC with visual and audible indicators for the Alert.
You can generate alerts in three ways:
1. The ALERT Button on the Informer-IP keypad (ALERT)
2. The Rear Input – (terminal block on the inside of the unit)
Configuring Inputs
You can configure the Inputs to indicate specific user-predefined events (such as Medical
Alert, Local Disturbance Alert, Weapon Alert, Weather Alert, Fire Alert) or you can use the
inputs to request an Intercom Chat session or act as an acknowledgment of an Alert or
Test.