54
Configuring Informers Using Commander Software (Optional)
Informer-IP Series C
Federal Signal www.fedsig.com
The Zone Setup dialog box appears.
Fields
Description
Zone #
Displays the zone number.
Zone
Name
Enter the name of the zone.
Individual
Sites
Contains a list of all sites in your system.
Zone
Group A/B
Click either Zone Group A or Zone Group B. Use Group A and B to allow
ability to group zones.
Sites in
this Zone
Lists the RTUs that belong to this zone.
To remove a site, select desired site, and then click < Remove. Click <
Remove All to remove all sites from the selected zone.
Select
Zone
The currently selected zone configuration is automatically saved when
scrolling to another zone or closing the Zone Setup dialog box.
3. Enter the zone name in the Zone Name field.
4. Select the desired sites, and then click Add >.
NOTE: Use the table in Appendix B to record information.
5. Zone configuration is automatically saved when scrolling to another zone or closing
the Zone Setup dialog box.
