63
Configuring Informers Using Commander Software (Optional)
Setup, Program, and User Manual
Federal Signal www.fedsig.com
7. In the Mode list, click either Momentary or Continuous.
8. In the Polarity list, click either Normally Open or Normally Closed.
9. Click Save to save the Input-to-function assignment, Mode, and Polarity.
10. Repeat steps 4 through 6 for Inputs 2, 3, and 4 if applicable.
11. From the Configure RTU General Parameters dialog box, click Send to save the
programming information into the Informer unit.
10. Configuring Hot Keys
Use Hot Keys to simplify sending messages. Hot Keys are a set of preprogrammed keys
that issue an activation sequence. For example, you can set up your system to have the
following Hot Keys: tornado warning, flood warning, and all clear. With a click of a button,
you are able to activate your RTUs.
To configure Hot Keys in Commander:
1. Select Activate > Hotkey.
The Activation Hot Keys dialog box appears.
2. Click the Program Mode check box in the upper right corner.
