42
Configuring Informers Using Commander Software (Optional)
Informer-IP Series C
Federal Signal www.fedsig.com
NOTE: See the Mute audio during upload field in table, which prevents audio from being
broadcast over other audio equipment, such as amplified speakers.
To upload WAV files to the Informer:
1. From the Commander main window, click RTU.
The RTU dialog box appears.
2. Select the unit to configure.
3. Click Configure.
The Configure RTU General Parameters dialog appears.
4. Click Digital Voice Upload.
The Digital Voice Upload dialog box appears.
Fields
Description
Add
Messages
Opens a dialog box where you can select your WAV files. Go to your
Custom WAV File folder if you set one up.
Delete
Message
Deletes selected message from Message List.
Delete All
Deletes all messages from the Message List.
Mute
audio
during
upload
When enabled, messages are not audible at the RTU during
transmission. When disabled, the message playbacks through the RTU
speaker during transmission.
WARNING
: Mute audio during upload check box is enabled by default.
Use extreme caution when sending messages with the mute audio option
disabled, because this could be mistaken for an actual emergency.