Federal Signal Corporation CAMLCD-AHD-70, Инструкция по установке и эксплуатации

Страница: 35 / 68

31
Installing the Mobile Camera System
4. Wrap the cable connection in the supplied black waterproofing
tape.
Installing the Truck/Trailer Kit (CAMCABLE-TRK)
Find an appropriate location for installing the these components:
• a 65.5 ft (20 m) camera extension cable with heavy-duty 7-pin
covered connector, typically connected on a trailer
• a 15 ft (4.5 m) (straight length) coiled cable for connection be-
tween truck and trailer
• a 16.5 ft (5 m) camera extension cable with heavy-duty 7-pin cov-
ered connector, typically connected on the portion of the vehicle
with the monitor (e.g., passenger compartment of a truck)
Marking and Drilling Holes for the Heavy-Duty
7-Pin Connectors
AIRBAG DEPLOYMENT
Do not install equipment or route wiring in the deployment path
of an airbag.
Failure to observe this warning will reduce the effectiveness of
the airbag or potentially dislodge the equipment, causing serious
injury.
SEAT REMOVAL PRECAUTION
If a vehicle seat is temporarily removed, verify with the vehicle
manufacturer if the seat needs to be recalibrated for proper airbag
deployment.
Failure to heed this warning could result in death or serious injury.
LOCATING OPERATORS CONTROLS
Locate the camera(s), monitor, keyboard, control box, and digital
video recorder (as applicable) so the VEHICLE and SYSTEM can
be operated safely under all driving conditions.
Failure to heed this caution could result in driver distraction or
driver error while operating the vehicle.