Federal Signal Corporation CAMLCD-AHD-70, Инструкция по установке и эксплуатации

Страница: 30 / 68

26
Installing the Mobile Camera System
290A6049
Figure 4. Ball camera installation CAMCCD-BALLNTSC/CAMCCD-BALLPAL
Mounting the Ball Camera
1. Align the bottom half of the camera mounting bracket with the
drilled mounting holes on the vehicle while inserting the insulating
pad between the vehicle surface and the camera mounting bracket.
2. To affix the bottom half of the camera mounting bracket to the
vehicle, choose the appropriate screws for the mounting holes
you drilled.
a) If you are using the self-tapping screws, guide each screw
through the bottom half of the camera mounting bracket,
then into the drilled holes. Fasten the screws tightly to the
vehicle body.
b) If you are using the machine screws, guide each screw
through the camera mounting bracket, then into the drilled
holes. Install the matching lock and flat washers followed by
the nuts on the opposite side of the vehicle surface. Fasten
the mounting hardware tightly to the vehicle body.
3. Install the camera while adjusting the viewing angle in the mount-
ing bracket using the included Allen wrench. To verify the image