FCA US DODGE CHARGER RWD 2019, Руководство пользователя

Страница: 141 / 244

6. Remove the wheel chocks, jack and lug
wrench assembly from under the spare tire.
Turn the jack screw to the left to loosen the
lug wrench, and remove the wrench from the
jack assembly.
WARNING!
A loose tire or jack thrown forward in a colli-
sion or hard stop could endanger the occu-
pants of the vehicle. Always stow the jack
WARNING!
parts and the spare tire in the places pro-
vided. Have the deflated (flat) tire repaired or
replaced immediately.
Preparations For Jacking
1. Park the vehicle on a firm, level surface as
far from the edge of the roadway as possible.
Avoid icy or slippery areas.
WARNING!
Do not attempt to change a tire on the side of
the vehicle close to moving traffic. Pull far
enough off the road to avoid being hit when
operating the jack or changing the wheel.
2. Turn on the Hazard Warning flasher.
3. Apply the parking brake.
4. Place the gear selector into PARK.
5. Turn off the ignition.
6. Block both the front and rear of the wheel
diagonally opposite of the jacking position
using the provided wheel chocks. For ex-
ample, if changing the right front tire, chock
the left rear wheel. Place both chocks under
the tire.
NOTE:
Passengers should not remain in the vehicle
when the vehicle is being jacked.
Jack Fastener
Wheel Chocks
139