FCA US DODGE CHARGER RWD 2019, Руководство пользователя

Страница: 150 / 244

5. Position the new Sealant Bottle (1) in the
housing so that the Sealant Hose (6) aligns
with the hose slot in the front of the housing.
Push the bottle into the housing. An audible
click will be heard indicating the bottle is
locked into place.
6. Verify that the cap is installed on the fitting
at the end of the Sealant Hose (6) and return
the hose to its storage area (located on the
bottom of the air pump).
7. Return the Tire Service Kit to its storage
location in the vehicle.
TIRE SERVICE KIT — IF EQUIPPED
Small punctures up to 1/4 inch (6 mm) in the
tire tread can be sealed with Tire Service Kit.
Foreign objects (e.g., screws or nails) should not
be removed from the tire. Tire Service Kit can be
used in outside temperatures down to approxi-
mately -4°F (-20°C).
This kit will provide a temporary tire seal, allow-
ing you to drive your vehicle up to 100 miles
(160 km) with a maximum speed of 50 mph
(80 km/h).
Tire Service Kit Storage
The Tire Service Kit is located in the trunk.
Tire Service Kit Components And Operation
Using The Mode Select Knob And Hoses
Your Tire Service Kit is equipped with the fol-
lowing symbols to indicate the air or sealant
mode.
Selecting Air Mode
Turn the Mode Select Knob (2) to this position
for air pump operation only. Use the Black Air
Pump Hose (5) when selecting this mode.
Selecting Sealant Mode
Turn the Mode Select Knob (2) to this position
to inject the Tire Service Kit Sealant and to
inflate the tire. Use the Sealant Hose (clear
hose) (3) when selecting this mode.
Using The Power Button
Push and release the Power Button (1) once to
turn on the Tire Service Kit. Push and release
the Power Button (1) again to turn Off the Tire
Service Kit.
Using The Deflation Button
Push the Deflation Button (9) to reduce the air
pressure in the tire if it becomes over-inflated.
Tire Service Kit Components
1 — Power
Button
4 — Seal-
ant Bottle 7 — Power
Plug
2 — Mode
Select Knob 5 — Air
Pump Hose
(Black) 8 — Pres-
sure Gauge
3 — Sealant
Hose (Clear) 6 — Seal-
ant Bottle
Release
Button 9 — Defla-
tion Button
IN
CASE
OF
EMERGENCY
148