FCA US DODGE CHARGER RWD 2019, Руководство пользователя

Страница: 59 / 244

NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator sys-
tem did not reset. If necessary, repeat this
procedure.
Secondary Method Of Resetting Engine Oil Life
1. Without pressing the brake pedal, push the
ENGINE START/STOP button and place the
ignition to the ON/RUN position (do not start
the engine).
2. Fully press the accelerator pedal, slowly,
three times within ten seconds.
3. Without pushing the brake pedal, push the
ENGINE START/STOP button once to return
the ignition to the OFF/LOCK position.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator sys-
tem did not reset. If necessary, repeat this
procedure.
Performance Shift Indicator (PSI) —
If Equipped
The Performance Shift Indicator (PSI) is en-
abled on vehicles with manual transmission, or
when a vehicle with automatic transmission is
in manual shift mode. The PSI provides the
driver with a visual indication within the instru-
ment cluster display when the driver configured
gear shift point has been reached and the driver
is still accelerating. This indication notifies the
driver to change gear corresponding to the con-
figured RPMs in the head unit.
Instrument Cluster Display Selectable
Menu Items
Push and release the up or down arrow button
until the desired Selectable Menu item is dis-
played in the instrument cluster display.
Follow the Menu or submenu prompts as de-
sired.
Refer to “Instrument Cluster Display” in “Get-
ting To Know Your Instrument Panel” in the
Owner’s Manual for further information.
Diagnostics
This feature allows the driver to view engine and
emission vehicle faults.
• Push OK to have the most recent fault code
sent.
• There is a delay when the next diagnostic code
is requested during which the following mes-
sage is displayed:
“Checking System for Diagnostic Codes.”
• Driver must push the OK button again to see
the next Pcode otherwise current message
remains displayed.
• Driver exits when they cycle to another sub-
menu (up or down).
• Faults are displayed from newest to the oldest.
• If the menu is exited before the end of codes is
reached - when the driver re-enters the list will
be restarted from the beginning.
• When no codes are present or the last code is
reached = (P0000) and this message is dis-
played:
“No or End of Diagnostic Codes.”
57