FCA US DODGE CHARGER RWD 2019, Руководство пользователя

Страница: 127 / 244

LaneSense Warning Message
The LaneSense system will indicate the current
lane drift condition through the instrument clus-
ter display.
Premium Instrument Cluster Display Screen —
If Equipped
When the LaneSense system is on; the lane
lines are gray when both of the lane boundaries
have not been detected and the LaneSense
telltale is solid white.
Left Lane Departure — Only Left Lane Detected
• When the LaneSense system is on, the Lane-
Sense telltale is solid white when only the left
lane marking has been detected and the sys-
tem is ready to provide visual warnings in the
instrument cluster display if an unintentional
lane departure occurs.
• When the LaneSense system senses the lane
has been approached and is in a lane depar-
ture situation, the left thick lane line flashes
yellow (on/off), the left thin line remains solid
yellow and the LaneSense telltale changes
from solid white to flashing yellow.
NOTE:
The LaneSense system operates with the similar
behavior for a right lane departure when only the
right lane marking has been detected.
Left Lane Departure — Both Lanes Detected
• When the LaneSense system is on, the lane
lines turn from gray to white to indicate that
both of the lane markings have been detected.
The LaneSense telltale is solid green when
both lane markings have been detected and
the system is “armed” to provide visual warn-
ings in the instrument cluster display and a
torque warning in the steering wheel if an
unintentional lane departure occurs.
• When the LaneSense system senses a lane
drift situation, the left thick lane line and left
thin line turn solid yellow. The LaneSense
telltale changes from solid green to solid yel-
low. At this time torque is applied to the
steering wheel in the opposite direction of the
lane boundary.
For example, if approaching the left side of the
lane the steering wheel will turn to the right.
• When the LaneSense system senses the lane
has been approached and is in a lane depar-
ture situation, the left thick lane line flashes
yellow (on/off) and the left thin line remains
solid yellow. The LaneSense telltale changes
from solid yellow to flashing yellow. At this
time torque is applied to the steering wheel in
the opposite direction of the lane boundary.
For example, if approaching the left side of the
lane the steering wheel will turn to the right.
NOTE:
The LaneSense system operates with the similar
behavior for a right lane departure.
Changing LaneSense Status
The LaneSense system settings can be config-
ured through the Uconnect system screen.
Follow these steps to change the LaneSense
settings:
1. Press the “Controls” button located on the
bottom of the Uconnect touchscreen display.
2. Press the “Settings” button.
3. Press the “Safety & Driving Assistance” button.
125