Freigabeversion
US-English | Original instructions
24
4.2.2 Switch off drive system
You can find detailed information here
→
in Chapter 24.1 “Switching the drive system on and
off” and in Chapter 4.4 “Switching on the drive system after standstill”.
You can switch off the drive system in various ways:
→
Press and hold the center button on the REMOTE for 1 second to turn off the
drive system.
or
→
Remove the DRIVEPACK from your e-bike.
or
→
Press the on/off button on the BATTERY for 3 seconds to switch off the
BATTERY.
In addition to the drive system, FAZUA also recommends switching
off the BATTERY if you park your e-bike for a longer period of time
(e.g. if you take a break during a trip).
You can find detailed information here
→
in Chapter 27.4 “Switching off the
4.3 Instructions for riding with the drive system
Observe the following instructions for riding your e-bike equipped with the FAZUA
RIDE 50 drive system.
Gear change:
The gearshift of your e-bike can be operated in the same way as that of a conven-
tional bicycle. Selecting a suitable gear increases the speed, power and range of
your e-bike while maintaining pedal frequency.
Irrespective of the type of gearshift mounted, the following applies:
→
Stop pedaling when you change gears. This relieves the load on the rear derailleur
and the drive of your e-bike.
Range/trip planning:
How long or how far you can ride your e-bike before you need to recharge the
BATTERY depends on several factors.
These factors include, but are not limited to:
• the set support level;
• the (riding) speed with which you move;
• your gear changing;
• the type of tire and the tire pressure set;
