FAZUA RIDE 50 TRAIL/STREET Скачать руководство пользователя страница 20

Страница: 20 / 68

Freigabeversion

US-English | Original instructions

USAGE

This chapter describes chronologically how to proceed when using the drive

system.

DANGER

Incorrect or improper handling may result in explosion, fire or acci-

dents and serious injury.

►

You must also read the detailed descriptions in the section for the

relevant component:

• before you use your e-bike equipped with the FAZUA RIDE 50

drive system for the first time,

• if you are unsure how to use it,
• if you have problems carry out the handling steps described

here.

4.1 Inserting and removing components

4.1.1 Inserting the BATTERY in the DRIVEPACK

You can find detailed information here

→

in Chapter 27.1 “Checking and switching on the

BATTERY” and in Chapter 27.2 “Inserting the BATTERY in the DRIVEPACK”.

On delivery, the BATTERY may only be precharged.

→

Fully charge the BATTERY before inserting it into the DRIVEPACK for

the first time.

DANGER

Risk of explosion and fire!

A damaged or dirty BATTERY may explode and/or cause a fire.

►

Never insert a damaged BATTERY into the drivepack.

►

Check the BATTERY for visible damage, such as cracks or burn

marks, before each insertion.

►

Make sure that the interfaces on the BATTERY are free of dirt

before using it.

1. Check the BATTERY for visible damage.
2. Press the on/off button on the BATTERY once to turn on the BATTERY.

Содержание RIDE 50 TRAIL/STREET




































































Результаты поиска

Содержание RIDE 50 TRAIL/STREET

Отзывы:

Похожие инструкции для RIDE 50 TRAIL/STREET

Бренды по названию

Популярные бренды

FAZUA RIDE 50 TRAIL/STREET, Оригинальное руководство пользователя

Результаты поиска

Содержание RIDE 50 TRAIL/STREET

Отзывы:

Похожие инструкции для RIDE 50 TRAIL/STREET

Бренды по названию

Популярные бренды